· Wide voltage input DC12-36V.

· The current can be adjusted from 200mA to 1000mA, and from 1000mA to 2000mA through the address writer (using 3G for address writing mode).

· Supports US ITT DMX512/1990 and extended DMX512, with adaptive communication rates of 250Kbps to 500Kbps.

· The refresh rate reached 3980Hz while ensuring a gray scale of up to 65536 levels.No additional repeaters are required, and each device that can function properly is equivalent to a signal shaping DMA repeater (after testing, each device is connected to a 305 meter network cable),

· The lamp can still work normally without serious deformation when connected to 20 device network cables with a total length of 5795 meters.

· If there is damage to the lighting fixtures on site that leads to bus failure, the driver will automatically cut off the signal without affecting the front lighting fixtures.

· Combined with serial chips, it is easy to check problems, with signal amplification function, high reliability of DMX512, and long transmission distance.

· Drive the entire circuit to write the address without adding an address line, and can directly write the address through the AB line.

· Complete interface anti reverse protection, capable of withstanding up to DC48V reverse protection.